ESS logo
schmart-logoschmart-graphic

HOME | SCHMARTBOARD | SCHMARTMODULES

SchmartModules

710-0001-01

710-0001-01

Populated RS-232 SchmartModule

Module 2 channels(2 transmit and 2 receive), RS232 and V.28-speeds up to 230Kb. Operates from a single 5V Power source, ESD protected in excess of +/- 15Kv. on all I/O lines, 4 LEDs(2 for transmit, 2 for receive), Preinstalled headers for transceiver lines, Preinstalled headers for +5v and Ground.

(PDF)

710-0002-01

710-0002-01Power SchmartModule

Variable Power Supply: -9, -12, +2.5, +3.3, +5, +9 and +12 volts. This is a bare PCB that can be populated using mostly through-hole or 100% surface-mount components. Customer can source parts using the attatched bill of materials.

(PDF)
(PDF)

710-0003-01

710-0003-01

1.5 Volt Populated Single Voltage Regulated Power Module

1.5V Power Single Voltage Regulated Module: This is a highly stable linear-low-drop voltage regulator. With 12V DC input, output is 1.5V and provide up to 800mA of output current. For negative voltage: With two power modules, connect the output ground pins together as common ground. You will then get two voltage outputs. One of them is used as positive and the other would be negative.

rohs logo

710-0003-02

710-0003-02

1.8 Volt Populated Single Voltage Regulated Power Module

1.8V Power Single Voltage Regulated Module: This is a highly stable linear-low-drop voltage regulator. With 12V DC input, output is 1.8V and provide up to 800mA of output current. For negative voltage: With two power modules, connect the output ground pins together as common ground. You will then get two voltage outputs. One of them is used as positive and the other would be negative.

rohs logo

710-0003-03

710-0003-03

2.5 Volt Populated Single Voltage Regulated Power Module

2.5V Power Single Voltage Regulated Module: This is a highly stable linear-low-drop voltage regulator. With 12V DC input, output is 2.5V and provide up to 800mA of output current. For negative voltage: With two power modules, connect the output ground pins together as common ground. You will then get two voltage outputs. One of them is used as positive and the other would be negative.

rohs logo

710-0003-04

710-0003-04

3.3 Volt Populated Single Voltage Regulated Power Module

3.3V Power Single Voltage Regulated Module: This is a highly stable linear-low-drop voltage regulator. With 12V DC input, output is 3.3V and provide up to 800mA of output current. For negative voltage: With two power modules, connect the output ground pins together as common ground. You will then get two voltage outputs. One of them is used as positive and the other would be negative.

rohs logo

710-0003-05

710-0003-05

5 Volt Populated Single Voltage Regulated Power Module

5V Power Single Voltage Regulated Module: This is a highly stable linear-low-drop voltage regulator. With 12V DC input, output is 5V and provide up to 1 Amp of output current. For negative voltage: With two power modules, connect the output ground pins together as common ground. You will then get two voltage outputs. One of them is used as positive and the other would be negative.

rohs logo

710-0003-06

710-0003-05

9 Volt Populated Single Voltage Regulated Power Module

9V Power Single Voltage Regulated Module: This is a highly stable linear-low-drop voltage regulator. With 12V DC input, output is 9V and provide up to 1 Amp of output current. For negative voltage: With two power modules, connect the output ground pins together as common ground. You will then get two voltage outputs. One of them is used as positive and the other would be negative.

rohs logo

topofopageCall, fax, or e-mail for quotes.
More products available.

Phone: 800-726-0084 or 805-922-6383
Fax: 805-928-0253

Copyright © 2009 Electronic School Supply, Inc. All rights reserved.
All brand names and products are trademarks or registered trademarks
of their respective holders. All features and specifications subject to change without notice.